TM-5-3805-254-14-P-2

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, GENERAL SUPPORT AND DEPT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS INFORMATION AND SUPPLEMENTAL MAINTENANCE INSTRUCTIONS)

JUNE 1980

TM-5-3805-254-14-P-2 - Page 854 of 894

TRUCK SERVICE MANUAL

WHEELS, RIMS, AND TIRES

NOTE:

The cotter key should be inserted with the long

tang toward the end of the spindle. Bend long tang of

cotter key over end of spindle. Clip remaining tang

leaving just enough stock to bend down against side of

nut. A correctly installed cotter key should have the

appearance as shown in Figure 2.