TM 5-3805-254-20-1
ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
b.If multimeter reads 0 ohms, install lamp (3).
Put lamp (3) in lamp socket (1).
Push
in, turn clockwise and release.
Push lamp socket (1) into oil pressure/water
temperature indicator (2) and go to step 4.
Step 4.Using multimeter, set to ohms scale and adjust to 0 ohms.
Connect red test lead to lamp
socket (1) and black test lead to ground stud (11).
Check for 0 ohms on multimeter.
Disconnect
test leads.
If multimeter reads no continuity, 11 wire (12) must be replaced.
Notify Direct Support
Maintenance.
2-297