TM 5-3805-254-20-1
ACCESS PROCEDURES - CONTINUED
JACKING FRONT OF DUMP TRUCK
Raising
NOTE
Steps given are typical for left or right side.
1. Position dolly-type hydraulic jack (1) under front I-beam (2).
2. Raise vehicle until tire is off ground.
3. Position 10-ton trestle (3) under I-beam (2).
4. Lower dolly-type hydraulic jack (1) and take out from under dump truck.
Lowering
5. Position dolly-type hydraulic jack (1) under front I-beam (2).
6. Raise vehicle until front I-beam (2) is off 10-ton trestle (3).
7. Take 10-ton trestle (3) out from under dump truck.
8. Lower dolly-type hydraulic jack (1) completely.
9. Take dolly-type hydraulic jack (1) out from under dump truck.
2-442