TM 5-3805-254-20-2
TRANSMISSION OIL PAN - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
FILLING
19.
Oil filler tube (1)
Dipstick (2)
Turn handle counterclockwise and pull out.
20.
Oil filler tube (1)
Add proper amount and grade of trans-
mission oil (LO 53805-254-12).
21.
Dipstick (2)
Put in.
22.
Dump truck
a.
Start engine (TM 5-3805254-10).
b.
Move transmission selector lever
through all driving ranges.
c.
Allow TRANSMISSION TEMP gage to
indicate 1600 to 2000F.
d.
Perform step b again.
e.
Put transmission selector lever in
N (neutral).
23.
Dipstick (2)
a.
Wipe clean with wiping rag.
b.
Push in as far as possible.
c.
Pull out and check oil level.
Oil level should be between FULL and
ADD marks on dipstick.
If oil is at ADD or below, perform step
21 again.
If oil is above FULL mark on dipstick,
drain oil to reach proper level.
If oil level is between FULL and ADD
marks, push in dipstick and turn
handle clockwise to tighten.
TA244269
2-906