TM-5-3805-254-20-2

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL VOLUME 2 OF 2

JANUARY 1988

TM-5-3805-254-20-2 - Page 578 of 971

TM 5-3805-25420-2

FRONT HUB AND BRAKEDRUM ASSEMBLY AND WHEEL BEARINGS - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

26

Front hub (2)

Inner bearing

a Position rear hub on wood blocks.

cup (4)

b Using puller, pull out.

c Get rid of.

27

New inner bearing

a Position level and square.

cup (4)

b Drive in until flush with top of front hub

using wood block and 3-pound cross-

peen hammer.

c Seat completely by tapping on alternate

sides using 3-pound cross-peen ham-

mer and brass driftpin punch.

Make sure inner bearing cup Is flush

with machined surface inside front

hub.

28

Outer bearing

a Position rear hub on wood blocks.

cup (5)

b Using puller, pull out.

c Get rid of.

29

New outer bearing

a Position level and square.

cup (5)

b Drive in until flush with top of front hub

using wood block and 3-pound cross-

peen hammer.

c Seat completely by tapping on alternate

sides using 3-pound cross-peen ham-

mer and brass driftpin punch.

Make sure outer bearing cup is flush

with machined surface inside front

hub.

TA244441

2-1183