TM-5-3805-254-20-2

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL VOLUME 2 OF 2

JANUARY 1988

TM-5-3805-254-20-2 - Page 579 of 971

TM 53805-254-20-2

FRONT HUB AND BRAKEDRUM ASSEMBLY AND WHEEL BEARINGS - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

ASSEMBLY

30

Front hub (1)

Inner bearing (2)

Soak inner bearing and coat inner bearing

and inner bearing

cup with lubricating oil

cup (3)

(LO 5-3805-254-12).

31

Inner bearing

Inner bearing (2)

Put in.

cup (3)

32

Front hub (1)

New grease seal (4)

a Position level and square.

b Tap in until flush with top of front hub us-

ing wood block and 3-pound cross-peen

hammer.

Make sure grease seal Is level.

INSTALLATION

WARNING

Due to excessive weight, assistance will be needed to lift hub and breakdrum assembly. Failure to observe

this precaution could cause serious injury to personnel

TA244442

2-1184