TM-5-3805-254-34
TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
MARCH 1993
TM-5-3805-254-34 - Page 188 of 727
TM 5-3805-254-34
6-9.
INSTALL AND REMOVE TRANSMISSION FROM OVERHAUL STAND.
This Task Covers:
a.
Install
b.
Remove
Initial Setup:
Equipment Conditions:
Materials/Parts
:
•
Transmission removed from vehicle (see paragraph
•
Four lockwashers
6-7).
•
Eight bolts
•
Eight nuts
Tools/Test Equipment
:
Personnel Required:
Two
•
General mechanic’s tool kit
•
Field automotive shop set
•
Overhaul stand
•
Transmission holding fixture
a.
INSTALL
NOTE
Bolts must be removed now, In order to allow separation of torque
converter housing from transmission housing In paragraph 6-11.
1.
Remove two bolts (2) and lockwashers (3) from each side of transmission (1).
Discard lockwashers.
2.
Install transmission holding fixture (9) to transmission (1) with four bolts (4) and nuts (8).
3.
Attach overhead lifting device to transmission holding fixture (9).
TA703785
6-62
Back to Top
