TM-5-3805-254-34

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

MARCH 1993

TM-5-3805-254-34 - Page 220 of 727

TM 5-3805-254-34

6-16.

INPUT SHAFT AND FORWARD CLUTCH REPLACEMENT.

This Task Covers:

a.

Removal

b.

Installation

Initial Setup:

Equipment Conditions:

Materials/Parts:

•

Oil pump, front support, and converter housing

•

Grease (Item 10, Appendix B)

removed (see paragraph 6-15)

•

Three seal rings

Tools/Test Equipment:

•

General mechanic's tool kit

a.

REMOVAL

1.

Remove seal ring (1) from front of input shaft (10).

Discard seal ring.

2.

Remove bearing race (2) from hub of forward clutch housing (4).

3.

Remove two seal rings (3) from input shaft (10).

Discard seal rings.

4.

Remove Input shaft (10) and forward clutch housing (4) as an assembly from transmission housing (9).

5.

Remove bearing race (6), roller bearing (7), and bearing ring (8) from forward clutch hub (5).

6-94