TM-5-3805-254-34

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

MARCH 1993

  TM-5-3805-254-34 - Page 359 of 727

TM 5-3805-254-34
9-1.
FORWARD-REAR DIFFERENTIAL MAINTENANCE (Con’t).
f.
CROSS-SHAFT ASSEMBLY AND INSTALLATION
1.
Apply grease to center hole of ring gear set (51)
and bearing (54) and install along with recessed
washer (53) into differential carrier (2).
2.
Use two cross-shaft removal spacers (52) to
hold ring gear set (51) away from differential carrier (2)
wall.
3.
Apply grease to entering shaft of cross-shaft
(50).
4.
Press cross-shaft (50) and key (55) into ring
gear set (51).
5.
Remove two cross-shaft removal spacers (52)
from differential carrier (2).
TA703944
9-11


Back to Top