TM-5-3805-254-34

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

MARCH 1993

TM-5-3805-254-34 - Page 364 of 727

TM 5-3805-254-34

9-1.

FORWARD-REAR DIFFERENTIAL MAINTENANCE (Con’t).

h.

DIFFERENTIAL ASSEMBLY AND INSTALLATION

NOTE

If no-spin differential was disassembled, perform steps 1 through 5.

If not, go to step 6.

1.

Install two drive gears (25), spring retainers (24), springs (23), and side gears (22) on spider (26).

2.

Install bolt (12) and washer (13) through center of assembly.

3.

Place no-spin differential assembly (14) on arbor

press.

4.

Press on head of bolt (12) and compress no-spin

differential assembly (14) slowly.

As no-spin

differential assembly in compressed, ensure that

splines of side gears (22) and drive gears (25)

mesh.

TA703949

9-16