TM-5-3805-254-34

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

MARCH 1993

TM-5-3805-254-34 - Page 449 of 727

TM 5-3805-254-34

12-3. RIGHT POWER STEERING GEAR REPAIR (Con’t).

- -m ’

V

3. Remove two capscrews (10) and lockwashers (9) from gear retaining nut (8).

Discard lockwashers.

4. Remove gear retaining nut (8) from output shaft (6) by rotating counterclockwise.

NOTE

Note position of alinement mark on center tooth of piston and gear for assembly.

5. Remove output shaft (6) and gear (7) assembly from gear housing (1).

NOTE

Note position of alinement mark on output shaft and gear for assembly.

6. Press gear (7) from output shaft (6).

7. Make alinement marks on cylinder head (12), and gear housing (1) for assembly.

8. Remove ten screws (13), lockwashers (14), cylinder head (12), and gasket (11) from gear housing (1).

Discard

lockwashers and gasket.

9. Repeat step 8 for other cylinder head (12).

TA704027

12-16