TM-5-3805-254-34
TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
MARCH 1993
TM-5-3805-254-34 - Page 567 of 727
TM 5-3805-254-34
15-4.
CAB ASSEMBLY MAINTENANCE (Con’t).
FOLLOW-ON TASKS:
• Install coat hook (see paragraph 15-6).
• Install cab door opening weatherseal (see paragraph 15-8).
• Install air intake duct (see paragraph 15-12).
• Install cowl ventilator (see paragraph 15-11).
• Install sunvisors (see paragraph 15-19).
• Install engine cover (see paragraph 15-1).
• Install rear glass (see paragraph 15-26).
• Install windshield glass (see paragraph 15-25).
• Install headlining (see paragraph 15-23).
• Install instrument panel pad (see paragraph 15-21).
• Install instrument panels (see paragraph 15-22).
• Install heater box (see paragraph 15-35).
• Install cab doors and hinges (see paragraph 15-16).
• Install floorboards and inserts (see paragraph 15-3).
• Install floormats (see paragraph 15-2).
• Install transmission cable hood (see paragraph 5-6).
• Install reverse polarity protection (see paragraph 5-6).
• Install body and chassis wiring (see paragraph 5-6).
• Install oil filter (see TM 5-3805-254-20).
• Install air cleaner lines In firewall (see TM 5-3805-254-20).
• Install air cleaner and brackets (see TM 5-3805-254-20).
• Install dump body control lever switch (see TM 5-3805-254-20).
• Install air horn control valve (see TM 5-3805-254-20).
• Install air horn (see TM 5-3805-254-20).
• Install windshield wiper motor (see TM 5-3805-254-20).
• Install heater core hoses (see TM 5-3805-254-20).
• Install passenger's seat (see TM 5-3805-254-20).
• Install driver's seat (see TM 5-3805-254-20).
• Install cab floor through connector to double check valve hose (see TM 5-3805-254-20).
• Install parking brake lines (see TM 5-3805-254-20).
• Install brake pedal (see TM 5-3805-254-20).
• Install transmission shift cable (see TM 5-3805-254-20).
• Install transmission shift control stand (see TM 5-3805-254-20).
• Install automatic override module (see TM 5-3805-254-20).
• Install cab roof marker light and-clearance light (see TM 5-3805-254-20).
• Install rear-rear of cab junction box (see TM 5-3805-254-20).
• Install front-rear of cab junction box (see TM 5-3805-254-20).
• Install left side of firewall junction box (see TM 5-5805-254-20).
• Install right engine side of firewall junction box (see TM 5-3805-254-20).
• Install center engine side of firewall junction box (see TM 5-3805-254-20).
• Install ignition system starter circuit breaker (see TM 5-3805-254-20).
• Install fuse block (see TM 5-3805-254-20).
• Install marker light 30 amp circuit breaker (see TM 5-3805-254-20).
• Install headlight 20 amp circuit breaker (see TM 5-3805-254-20).
• Install tail and panel light 20 amp circuit breaker (see TM 5-3805-254-20).
• Install stop and domelight 30 amp circuit breaker (see TM 5-3805-254-20).
• Install glow plug and cigar lighter 40 amp circuit breaker (see TM 5-3805-254-20).
• Install horn 20 amp circuit breaker (see TM 5-3805-254-20).
15-19
Back to Top
