TM-5-3805-264-13-P
TRUCK, DUMP, HEAVY, BODY M917A1 AND M917A2
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2014
TM-5-3805-264-13-P - Page 218 of 660
REPAIR
NOTE
Wiring harness need not be removed from vehicle to make repairs.
Repair wiring harness in accordance with instructions in General Maintenance Instructions (WP 0072).
END OF TASK
INSTALLATION
1.
Position truck–to–MCS tailgate wiring harness (Figure 4, Item 2) between points of connection.
2.
Connect truck–to–MCS tailgate wiring harness (Figure 4, Item 2) to chassis wiring harness
(Figure 4, Item 1).
Figure 4.
Wiring Harness Installation.
3.
Position truck–to–MCS tailgate wiring harness receptacle (Figure 5, Item 4) against cover plate
(Figure 5, Item 3). Secure with two screws (Figure 5, Item 5) and nuts (Figure 5, Item 2).
4.
Install cover plate (Figure 5, Item 3) on dump body pillar (Figure 5, Item 1) with four screws
(Figure 5, Item 6).
TM 5-3805-264-13&P
0033
0033-4
Back to Top
