TM-5-3805-264-13-P

TRUCK, DUMP, HEAVY, BODY M917A1 AND M917A2

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2014

TM-5-3805-264-13-P - Page 221 of 660

FIELD MAINTENANCE

MATERIAL CONTROL SYSTEM (MCS) TAILGATE WIRING HARNESS MAINTENANCE (M917A1 WITH MCS

AND M917A2 WITH MCS)

INITIAL SETUP:

Tools and Special Tools

General Mechanic's Tool Kit

(WP 0113, Table 1, Item 12)

Materials/Parts

Locknut Qty: 4 (WP 0114, Table 1, Item 21)

Marker Tags (WP 0112, Table 1, Item 36)

Tiedown Straps (WP 0112, Table 1, Item 33)

References

TM 9-2320-363-10

References (cont.)

WP 0005

WP 0072

Equipment Condition

Batteries disconnected (TM 9-2320-363-20-1,

TM 9-2320-363-20-2)

Master battery switch OFF (TM 9-2320-302-10)

MCS tailgate cover removed (WP 0043)

REMOVAL

NOTE

•

Wires should be tagged before disconnecting (WP 0072).

•

Note location of tiedown straps and routing of wiring harness prior to removal to

aid in installation.

1.

Disconnect wiring harness connector (Figure 1, Item 3) from truck–to–MCS tailgate wiring harness

receptacle (Figure 1, Item 2) at driver's side dump body pillar (Figure 1, Item 1).

Figure 1.

Wiring Harness Removal.

TM 5-3805-264-13&P

0034

0034-1