TM-5-3805-264-13-P

TRUCK, DUMP, HEAVY, BODY M917A1 AND M917A2

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2014

TM-5-3805-264-13-P - Page 264 of 660

INSTALLATION

WARNING

Use extreme care when handling heavy parts. Lifting cables, chains, hooks, and slings

must be in good condition and of suitable capacity. Keep clear of parts supported only by

lifting device. Failure to comply may result in personnel injury, death, and/or damage to

equipment.

1.

Raise MCS tailgate (Figure 2, Item 5) to dump body (Figure 2, Item 8).

2.

Position MCS tailgate (Figure 2, Item 5) so that bottom pins (Figure 2, Item 7) are resting on dump body

stops (Figure 2, Item 6) and tailgate hinge pin holes are aligned with dump body hinge pin holes.

3.

Install hinge pins (Figure 2, Item 1) and linch pins (Figure 2, Item 2) on each side of MCS tailgate

(Figure 2, Item 5).

4.

Remove lifting slings (Figure 2, Item 4) from MCS tailgate (Figure 2, Item 5).

5.

Connect MCS quick-disconnect air line (Figure 2, Item 9).

6.

Connect MCS tailgate wiring harness connector (Figure 2, Item 3) to receptacle (Figure 2, Item 10).

TM 5-3805-264-13&P

0042

0042-4