TM-5-3805-264-13-P

TRUCK, DUMP, HEAVY, BODY M917A1 AND M917A2

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2014

TM-5-3805-264-13-P - Page 254 of 660

REMOVAL

1.

Remove four locknuts (Figure 1, Item 8), screws (Figure 1, Item 6), plate (Figure 1, Item 5), and mud flap

(Figure 1, Item 7) from mounting plate (Figure 1, Item 4). Discard locknuts.

2.

Remove two spring pins (Figure 1, Item 2), washers (Figure 1, Item 3), and shaft (Figure 1, Item 9), and

separate mounting plate (Figure 1, Item 4) from weldment (Figure 1, Item 1) on dump body. Discard

spring pins.

Figure 1.

Mud Flap Removal.

3.

Remove two locknuts (Figure 2, Item 1), screws (Figure 2, Item 4), anchor plate (Figure 2, Item 5), and

mounting plate (Figure 2, Item 3) from mud flap (Figure 2, Item 2). Discard locknuts.

Figure 2.

Mud Flap Hardware Removal.

END OF TASK

TM 5-3805-264-13&P

0040

0040-2