TM-5-3805-264-13-P
TRUCK, DUMP, HEAVY, BODY M917A1 AND M917A2
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2014
TM-5-3805-264-13-P - Page 248 of 660
REMOVAL
1.
Remove spring pin (Figure 1, Item 5) and body prop (Figure 1, Item 4) from pivot bracket (Figure 1, Item 3).
Discard spring pin.
2.
Remove two nuts (Figure 1, Item 6), washers (Figure 1, Item 7), screws (Figure 1, Item 2), and pivot bracket
(Figure 1, Item 3) from frame (Figure 1, Item 11).
3.
Remove nut (Figure 1, Item 8), washer (Figure 1, Item 9), screw (Figure 1, Item 1), and support bracket
(Figure 1, Item 10) from frame (Figure 1, Item 11).
END OF TASK
INSTALLATION
1.
Install support bracket (Figure 1, Item 10) on frame (Figure 1, Item 11) with screw (Figure 1, Item 1), washer
(Figure 1, Item 9), and nut (Figure 1, Item 8).
2.
Install pivot bracket (Figure 1, Item 3) on frame (Figure 1, Item 11) with two screws (Figure 1, Item 2),
washers (Figure 1, Item 7), and nuts (Figure 1, Item 6).
3.
With body prop (Figure 1, Item 4) positioned above support bracket (Figure 1, Item 10), install body prop on
pivot bracket (Figure 1, Item 3) with new spring pin (Figure 1, Item 5).
Figure 1.
Body Prop Replacement.
END OF TASK
FOLLOW-ON MAINTENANCE
Lubricate body prop (WP 0073).
END OF TASK
END OF WORK PACKAGE
TM 5-3805-264-13&P
0038
0038-2
Back to Top
