TM-5-3805-264-13-P

TRUCK, DUMP, HEAVY, BODY M917A1 AND M917A2

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2014

TM-5-3805-264-13-P - Page 250 of 660

REMOVAL

1.

At center of cab shield (Figure 1, Item 1), remove six locknuts (Figure 1, Item 9), 12 washers

(Figure 1, Item 8), and six screws (Figure 1, Item 7). Discard locknuts.

2.

Remove body props and lower dump body (WP 0005).

3.

Attach lifting slings (Figure 1, Item 2) to cab shield (Figure 1, Item 1) and remove slack from lifting slings.

4.

Remove six locknuts (Figure 1, Item 9), 12 washers (Figure 1, Item 8), and six screws (Figure 1, Item 7)

from outside edges of cab shield (Figure 1, Item 1) and dump body (Figure 1, Item 6). Discard locknuts.

5.

Remove two locknuts (Figure 1, Item 5), four washers (Figure 1, Item 4), and two screws (Figure 1, Item 3)

from top of cab shield (Figure 1, Item 1) and dump body (Figure 1, Item 6). Discard locknuts.

6.

Lift cab shield (Figure 1, Item 1) from dump body (Figure 1, Item 6) and place cab shield in a safe work

area.

Figure 1.

Cab Shield Removal.

END OF TASK

CLEANING AND INSPECTION

Clean and inspect components in accordance with General Maintenance Instructions (WP 0072).

END OF TASK

TM 5-3805-264-13&P

0039

0039-2