TM-5-3805-264-13-P

TRUCK, DUMP, HEAVY, BODY M917A1 AND M917A2

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2014

TM-5-3805-264-13-P - Page 249 of 660

FIELD MAINTENANCE

CAB SHIELD REPLACEMENT

INITIAL SETUP:

Tools and Special Tools

General Mechanic's Tool Kit

(WP 0113, Table 1, Item 12)

Engine and Transmission Sling: 3-ton

(WP 0113, Table 1, Item 9)

Wrench, Torque: 1/2 in. drive, 0–175 lb-ft

(0–237 N•m) (WP 0113, Table 1, Item 17)

Suitable Lifting Device

Materials/Parts

Locknut Qty: 14 (WP 0114, Table 1, Item 18)

References

WP 0072

Equipment Condition

Dump body raised and supported on body props

(WP 0005)

Beacon warning light removed

(TM 9-2320-363-10 or TM 9-2320-302-10)

Beacon warning light wiring harness removed

from cab shield (WP 0031)

WARNING

Use extreme care when handling heavy parts. Lifting cables, chains, hooks, and slings

must be in good condition and of suitable capacity. Keep clear of parts supported only by

lifting device. Failure to comply may result in personnel injury, death, and/or damage to

equipment.

TM 5-3805-264-13&P

0039

0039-1