TM-5-3805-264-13-P

TRUCK, DUMP, HEAVY, BODY M917A1 AND M917A2

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2014

TM-5-3805-264-13-P - Page 238 of 660

REMOVAL - Continued

4.

Remove six locknuts (Figure 3, Item 2) and screws (Figure 3, Item 4) from driver's side and passenger's

side mounting brackets (Figure 3, Item 3). Remove brackets from hydraulic cylinder pivots

(Figure 3, Item 6). Discard locknuts.

5.

Disengage Power Take Off (PTO) (TM 9-2320-363-10 or TM 9-2320-302-10). Lower hydraulic cylinder

(Figure 3, Item 1) by placing hydraulic control lever in cab in DOWN position (WP 0005). With hydraulic

cylinder lowered, place wooden blocks between base of cylinder and cylinder support frame

(Figure 3, Item 5) to provide support.

Figure 3.

Mounting Bracket Removal.

TM 5-3805-264-13&P

0037

0037-4