TM-5-3805-264-13-P

TRUCK, DUMP, HEAVY, BODY M917A1 AND M917A2

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2014

TM-5-3805-264-13-P - Page 233 of 660

INSTALLATION

WARNING

Use extreme care when handling heavy parts. Lifting cables, chains, hooks, and slings

must be in good condition and of suitable capacity. Keep clear of parts supported only by

lifting device. Failure to comply may result in personnel injury, death, and/or damage to

equipment.

1.

Attach slings to cylinder support frame (Figure 2, Item 2) and attach slings to lifting device. Take up slack in

slings with lift.

2.

Lift cylinder support frame (Figure 2, Item 2) and position on vehicle chassis (Figure 2, Item 5).

3.

Install passenger's side angle bracket (Figure 2, Item 6) and driver's side angle bracket (Figure 2, Item 3) on

vehicle chassis (Figure 2, Item 5) and cylinder support frame (Figure 2, Item 2) with 24 screws

(Figure 2, Item 1) and new locknuts (Figure 2, Item 4).

4.

Torque locknuts (Figure 2, Item 4) to 200 lb-ft (271 N•m).

Figure 2.

Cylinder Support Frame Installation.

END OF TASK

TM 5-3805-264-13&P

0036

0036-3