TM-5-3805-264-13-P

TRUCK, DUMP, HEAVY, BODY M917A1 AND M917A2

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2014

TM-5-3805-264-13-P - Page 232 of 660

REMOVAL

WARNING

Use extreme care when handling heavy parts. Lifting cables, chains, hooks, and slings

must be in good condition and of suitable capacity. Keep clear of parts supported only by

lifting device. Failure to comply may result in personnel injury, death, and/or damage to

equipment.

1.

Attach slings to cylinder support frame (Figure 1, Item 2) and attach slings to lifting device. Take up slack in

slings with lift.

2.

Remove 24 locknuts (Figure 1, Item 4), screws (Figure 1, Item 1), driver's side angle bracket

(Figure 1, Item 3), and passenger's side angle bracket (Figure 1, Item 6) from cylinder support frame

(Figure 1, Item 2) and vehicle chassis (Figure 1, Item 5). Discard locknuts.

3.

Remove cylinder support frame (Figure 1, Item 2) from vehicle chassis (Figure 1, Item 5) and move frame to

safe work area. Remove slings.

Figure 1.

Cylinder Support Frame Removal.

END OF TASK

TM 5-3805-264-13&P

0036

0036-2