TM-5-3805-264-13-P
TRUCK, DUMP, HEAVY, BODY M917A1 AND M917A2
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2014
TM-5-3805-264-13-P - Page 4 of 660
WARNING SUMMARY - Continued
EXPLANATION OF SAFETY WARNING ICONS - Continued
MOVING PARTS
- Human figure with arm caught between gears shows that the moving parts of the
equipment present a danger to life or limb.
GENERAL SAFETY WARNING DESCRIPTIONS
WARNING
CARGO COVER OPERATION
Observe the following safety regulations when operating cargo cover:
•
Never operate cargo cover under obstructions, such as trees and power lines.
•
Ensure that all personnel are clear of rear of dump body and the immediate area of
the cover.
•
Ensure that chain cover is in place.
•
Keep all clothing away from moving parts.
•
DO NOT cover load with crank handle installed.
•
DO NOT use cargo cover frame as a grabhandle.
Failure to comply may result in personnel injury or death.
WARNING
COMPRESSED AIR
Particles blown by compressed air are hazardous. DO NOT exceed 15 psi (103 kPa)
nozzle pressure when drying parts with compressed air. Use a maximum of
30 psi (207 kPa) when cleaning components. DO NOT direct compressed air against
human skin. Use caution and wear protective clothing (goggles/shield, gloves, etc.) when
working with compressed air. Make sure air stream is directed away from user and other
personnel in the area. Failure to comply may result in personnel injury.
TM 5-3805-264-13&P
b
Back to Top
