TM-5-3805-264-13-P

TRUCK, DUMP, HEAVY, BODY M917A1 AND M917A2

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2014

TM-5-3805-264-13-P - Page 440 of 660

REMOVAL

1.

Remove locknut (Figure 1, Item 4), washer (Figure 1, Item 3), bolt (Figure 1, Item 1), and tab

(Figure 1, Item 2) from spill shield (Figure 1, Item 7). Discard locknut.

2.

Repeat Step 1 for opposite side.

3.

Remove six locknuts (Figure 1, Item 5), washers (Figure 1, Item 6), bolts (Figure 1, Item 8), and spill shield

(Figure 1, Item 7). Discard locknuts.

END OF TASK

INSTALLATION

1.

Position spill shield (Figure 1, Item 7) on dump body and install six bolts (Figure 1, Item 8), washers

(Figure 1, Item 6), and new locknuts (Figure 1, Item 5).

2.

Position tab (Figure 1, Item 2) on spill shield (Figure 1, Item 7) and install bolt (Figure 1, Item 1), washer

(Figure 1, Item 3), and new locknut (Figure 1, Item 4).

3.

Repeat Step 2 for opposite side.

Figure 1.

Spill Shield Replacement.

END OF TASK

END OF WORK PACKAGE

TM 5-3805-264-13&P

0070

0070-2