TM-5-3805-264-13-P
TRUCK, DUMP, HEAVY, BODY M917A1 AND M917A2
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2014
TM-5-3805-264-13-P - Page 82 of 660
OPERATING CARGO COVER
WARNING
Observe the following safety regulations when operating cargo cover:
•
Never operate system under obstructions, such as trees and power lines.
•
Ensure that all personnel are clear of rear of dump body and the immediate area of
the cover.
•
Ensure that chain cover is in place.
•
Keep all clothing away from moving parts.
•
DO NOT cover load with crank handle installed.
•
DO NOT use cargo cover frame as a grabhandle.
•
Failure to comply may result in personnel injury or death.
CAUTION
DO NOT attempt to uncover load without first removing any snow or water that has
accumulated on cargo cover. Failure to comply may result in damage to equipment.
1.
Uncovering Load
a.
Unfasten rubber strap (Figure 9, Item 1) from dump body weldment (Figure 9, Item 3) and fasten to
eyebolt (Figure 9, Item 2).
TM 5-3805-264-13&P
0005
0005-18
Back to Top
