TM-5-3805-264-13-P
TRUCK, DUMP, HEAVY, BODY M917A1 AND M917A2
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2014
TM-5-3805-264-13-P - Page 80 of 660
CONTROLLED SPREADING (M917A1 WITH MCS AND M917A2 WITH MCS) - Continued
WARNING
Care must be exercised when using the MCS. In the event material fails to flow through
gates, open gate using open control and clear jam using Basic Issue Items (BII) shovel.
DO NOT attempt to clear material using your hands or feet. Failure to comply may result in
personnel injury.
9.
If material becomes jammed in gates, open gate and clear jam with BII shovel.
10.
Close gates (Figure 8, Item 2) by moving toggle switches (Figure 8, Item 3) to CLOSED position.
11.
Lower dump body.
12.
Unplug MCS remote control (Figure 8, Item 4) from receptacle (Figure 8, Item 5). Stow remote control in
storage pouch and place in BII box.
13.
Lock gates closed by returning adjustment tube locking pins to top hole in tubes.
14.
Perform After Dumping steps, as applicable.
TM 5-3805-264-13&P
0005
0005-16
Back to Top
