TM-5-3805-274-13-P
DUMP TRUCK BODY M917
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
AUGUST 2013
TM-5-3805-274-13-P - Page 215 of 364
INSTALLATION - CONTINUED
5.
Install hydraulic reservoir tank (Figure 2, Item 2) on subframe rails (Figure 2, Item 8) with four washers
(Figure 2, Item 6), bolts (Figure 2, Item 7), washers (Figure 2, Item 6), and nuts (Figure 2, Item 3).
6.
Remove filler cap (Figure 2, Item 1) from hydraulic reservoir tank (Figure 2, Item 2) and fill hydraulic
reservoir tank (Figure 2, Item 2) to center of bottom sight glass indicator (Figure 2, Item 5).
7.
Start engine and engage PTO (TM 9-2320-273-10). Check for oil leaks, raise dump body bed, lower
safety strut from locked position to stowed position on subframe, lower dump body bed, recheck oil level
at top sight glass indicator (Figure 2, Item 5), and shut down engine.
END OF TASK
END OF WORK PACKAGE
Figure 1. Hydraulic Hose Removal and Installation.
2
3
4
5
6
7
8
1
9
10
Figure 2. Hydraulic Reservoir Removal and Installation.
1
2
3
6
7
5
8
5
4
4
TM 5-3805-274-13&P
0047
0047-3/4 blank
Back to Top
