TM-5-3895-371-24-P

BITUMINOUS DISTRIBUTOR BODY M918, MODEL D-63

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL WITH REPAIR PARTS AND SPECIAL TOOLS LIST

MARCH 1981

TM-5-3895-371-24-P - Page 256 of 330

TM 5-3895-371-24 & P

k.

Remove control box cover by removing nut (4), washer, valve knob (1), and sixteen screws

(2).

NOTE

In step I, observe that the wires being disconnected

are the same color as the wires remaining on each

terminal. Therefore it is not necessary to tag the wires

for identification.

l.

Disconnect eight wires (fig. 4-6) from terminal strip.

m.

Disconnect electrical fitting by removing knurled nut inside control box; then pull the eight

wires out of box.

Figure 4-6. Disconnect/Connect Terminal Strip Wires.

4-7