TM-5-3895-371-24-P
BITUMINOUS DISTRIBUTOR BODY M918, MODEL D-63
TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL WITH REPAIR PARTS AND SPECIAL TOOLS LIST
MARCH 1981
TM-5-3895-371-24-P - Page 278 of 330
CHAPTER 6
6-1. Removal.
REPAIR OF HYDRAULIC TANK
a.
breather (2), gage (3) and sight glass (4) may be removed and replaced. Fitting (8) tee (9) and sensor
Remove drain plug (7) from tank (6) and drain fluid below sight glass level (4) Cap (1)
unit (10) may be disconnected and replaced. Tank (6) and mounting brackets (5) may be replaced
or repaired with welds.
b.
Remove four nuts (15), lockwashers (14), and hook bolts (12); remove brackets (13 and 11).
lockwashers (17), and nuts (18).
Remove mounting brackets (5) from brackets (13 and 11) by removing four capscrews (16),
Figure 6-1. Disassemble/Reassemble Hydraulic lank.
6-1
Back to Top
