TM-5-3895-371-24-P

BITUMINOUS DISTRIBUTOR BODY M918, MODEL D-63

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL WITH REPAIR PARTS AND SPECIAL TOOLS LIST

MARCH 1981

TM-5-3895-371-24-P - Page 279 of 330

TM 5-3895-371-24 & P

6-2. General Repair. With the exception of the mounting brackets, frame clips and clamps, all parts

may be replaced with the tank installed. To replace parts on the lower half of the tank, first drain the

tank.

6-3. Installation.

a.

Install brackets (11 and 13) to mounting brackets (5) by installing four capscrews (16) with

lock&hers (17) and nuts (18).

b.

Install brackets (13 and 11) to chassis frame by installing four hook bolts (12), lockwashers

(14), and nuts (15).

c.

Reinstall cap (1), breather (2), gage (3), sight glass (4), drain plug (7), fitting (8), tee (9),

and sensor unit (10).

d.

Install hydraulic fluid and test for leaks.

6-2