TM-5-3895-371-24-P
BITUMINOUS DISTRIBUTOR BODY M918, MODEL D-63
TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL WITH REPAIR PARTS AND SPECIAL TOOLS LIST
MARCH 1981
TM-5-3895-371-24-P - Page 79 of 330
TM 5-3895-371-24 & P
LEGEND:
1.
PIN
2.
COTTER PIN (2)
3.
END CAP
4.
CYLINDER
5.
END CAP
6.
PIN
7.
YOKE
8.
LOCKNUT (2)
9.
FITTING (2)
10. BOLT
11.
YOKE
TA 075827
Figure 2-21.
Remove/Install Bottom Bar On-Off Cylinder.
d.
Installation of Bottom Bar On-Off Cylinder. (Refer to fig. 2-21.)
(1)
Connect yoke (7) to control linkage and secure with pin (6) and cotter pin (2).
(2)
Adjust length of yoke (11) to line up holes in yoke with hole in control linkage; then
install pin (1) through yoke (11) and secure with cotter pin (2).
(3)
Tighten locknut (8) on yokes (11) and (7).
(4)
Reconnect two air line fittings (9).
2-56
Back to Top
