TM-5-3895-372-10
CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F
TECHNICAL MANUAL; OPERATION INSTRUCTIONS
OCTOBER 1979
TM-5-3895-372-10 - Page 92 of 184
TM 5-3895-372-10
Table 3-1. Operator/Crew Preventive Maintenance Checks and Services.
B - Before
D - During
A - After
W - Weekly
M - Monthly
OPERATOR PMCS - M919 CONCRETE MOBILE MIXER BODY
Item
Interval
ITEM TO BE INSPECTED
Procedure: Check For And Have Repaired
Filled Or Adjusted As Needed
FOR READINESS REPORTING
Equipment is not Ready/
Available If:
No.
B
D
A W M
NOTE
Item number of column shall be used as
a source of item numbers for the “TM”
Number” column on DA Form 2404,
Equipment Inspection and Maintenance
work-sheet, in recording results of
PMCS.
Within designated interval, these checks
are to be performed in the order listed.
Perform weekly as well as before PMC’s
if you are the assigned driver but have
not operated the vehicle since the last
weekly, or you are operating the vehicle
for the first time.
ELECTRICAL SYSTEM
1
•
Visually inspect wiring and connectors
for obvious damage, breaks or fraying.
2
•
Make sure all clearance lamps are
working, pull out head-lamp switch on
truck instrument panel and check
marker lamps.
BODY
3
•
Visually inspect tanks and bins
for obvious damage, weld breaks.
Cracked, broken welds.
4
•
Check all mounting tie downs and
fasteners.
3-6
Back to Top
