TM 5-3895-372-20
Section II TROUBLESHOOTING
5-5. INTRODUCTION.
Troubleshooting procedures for the water system are given in table 5-1. It is arranged by malfunctions, in the following
order:
a
.
Mix water does not flow at a steady rate (Malfunction No. 1).
b
.
Water line valves leak (Malfunction No. 2).
c
.
Quick-opening valve sticks (Malfunction No. 3).
Most water system problems are caused by dirt or ice in the water lines. If you find sediment, remind the operator to use
clean water and to use the inlet strainer when filling the tank.
Freezing damage could occur. Caution operator to open draincocks and blow water out of system when he is finished with
cleanup. Check for clogged draincocks.
5-2