TM-5-3895-372-20
CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL
AUGUST 1980
TM-5-3895-372-20 - Page 273 of 694
TM 53895-372-20
ADMIX SYSTEMS.
6-19. DRY ADMIX BIN MAINTENANCE (Continued).
LOCATION/ITEM
ACTION
REMARKS
B.
DISASSEMBLY (Continued)I
43.
Eight screws (114), lock-
Loosen and remove
washers (117) and nuts (118).
two lid clamps (116).
44.
Hopper lid (112).
Lift from top hopper (119).
45.
Two gaskets (113), and
Remove if necessary.
two gaskets (115).
46.
Four screws (122), lock-
Loosen and remove
washers (124), and nuts (125).
four C-clamps (123).
47.
Two gaskets (120), and
Remove if necessary.
two gaskets (121).
C.
CLEANING AND INSPECTION.
48.
All metal parts.
lean and inspect for cracks,
Paint, weld or replace as
broken welds, rust and broken
required.
pieces.
49.
All bearings.
Check for roughness and
Replace as required.
looseness.
D.
ASSEMBLY.
50.
Two gaskets (112) and
Install in hopper lid (112) if
(115).
removed during disassembly.
51.
Hopper lid (112).
Install on top hopper (119).
52.
Two lid clamps (116).
Position lid clamps (116), and
secure with eight screws (114),
lockwashers (117) and nuts (118).
53.
Four C-clamps (123).
Aline C-clamps and secure with
four screws (122), lockwashers
(124), and nuts (125).
54.
Two gaskets (120)
Install if removed during dis-
and 121).
assembly.
6-78
Back to Top
