TM-5-3895-372-20

CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL

AUGUST 1980

TM-5-3895-372-20 - Page 279 of 694

TM 5-3895-372-20

ADMIX SYSTEMS.

6-19. DRY ADMIX BIN MAINTENANCE (Continued).

LOCATION/ITEM

ACTION

REMARKS

D. ASSEMBLY (Continued).

68.

Four gaskets (57) and

Install on bottom edge of

Two each side.

four gaskets (65).

inner hopper (66), if removed

during disassembly.

69.

Inner hopper (66).

Install with six screws (56),

and six nuts (60) to dry admix

bin top (61).

70.

Felt washer (70),

Position felt washer (70), and

Support feeder shaft so that

four washers (68),

two washers (68) on feeder

it stays level.

and feeder shaft (69).

shaft (69). Install feeder shaft

(69) and two washers (68).

71.

Felt washer (51), four

Position in inner hopper (66)

washers (52), and

and drive shaft (55) thru inner

agitator (54).

hopper (66), two washers (52),

agitator (54), two washers

(52),

felt washer (51), and

inner hopper (66).

72.

Roll pin (53).

Aline holes in agitator (54)

and shaft (55). Install roll pin

(53).

6-84