TM-5-3895-372-20

CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL

AUGUST 1980

TM-5-3895-372-20 - Page 316 of 694

TM 5-3895-372-20

AGGREGATE SUPPLY SYSTEM.

7-10. METAL GUIDES AND SAND DEFLECTOR MAINTENANCE (Continued).

LOCATION/ITEM

ACTION

REMARKS

A.

REMOVAL.

1.

Sixteen cap screws (4)

Unscrew and remove two rear

and washers (3).

guides (2) and deflector (5).

B.

INSTALLATION.

2.

Two rear guides (2)

Align slots with holes in RH

Slots should face upward.

and deflector (5).

support guide (1) and LH sup-

port guide (6).

3.

Sixteen cap screws (4)

Screw in and tighten.

and washers (3).

C.

ADJUSTMENT.

Adjust guides carefully.

If they are too high,

sand and stones will spill.

If they are too

low,

they will damage the belt.

4.

Two rear guides

a.

Place 1/16 in.

(1.6 mm) flat

(2) and deflector (5).

washers between guides and

belt.

Also place them between

deflector and belt.

b.

Tap guides and deflector

down to rest on flatwashers.

Work from one end to the

other.

Check cap screws (4)

for tightness as you go.

c.

Remove flat washers.

7-24