TM-5-3895-372-20
CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL
AUGUST 1980
TM-5-3895-372-20 - Page 338 of 694
TM 5-3895-372-20
AGGREGATE SUPPLY SYSTEM.
7-14. CONVEYOR BELT REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
B. INSTALLATION (Continued).
22.
Conveyor belt (20).
Manually feed end of belt
Two mechanics required.
up and over winch line
pulleys (21) to drive sproc-
kets and mate link to
sprocket.
23.
Towing vehicle (27).
Straddle conveyor belt (20)
and attach ropes.
24.
Shear bolt (28)
Remove from drive gear box
and nut (29).
coupling
25.
Towing vehicle (27).
Slowly pull the ropes (19)
Two assistants to help feed
while inserting the conveyor
conveyor belt (20) and keep
belt (20) into the mixer body.
ropes (19) from binding on
sides of chain (25). One
assistant required to monitor
belt travel around front
sprockets.
CAUTION
Proceed with special care when chains (25) are going around front sprockets to prevent binding and
damage to the chains or sprockets.
26.
Conveyor belt (20).
Allow to travel approximately
eight inches past front sproc-
kets.
27.
Pipe (26).
Slacken the ropes (19) and
remove pipe (26).
28.
Conveyor belt (20).
Manually wrap belt around
front sprockets and mate
link to sprocket.
29.
Towing vehicle (27).
Continue pulling ropes (19).
Stop the conveyor belt (20)
when the belt lacer reaches
the rear oval inspection window.
30.
Two ropes (19) and
Remove from chain links.
four wires (18).
31.
Two bolts (23), nuts
Remove.
(24) and twelve
washers (22).
7-46
Back to Top
