TM-5-3895-372-20

CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL

AUGUST 1980

TM-5-3895-372-20 - Page 346 of 694

TM 5-3895-372-20

AGGREGATE SUPPLY SYSTEM.

7-14. CONVEYOR BELT REPLACEMENT (Continued).

LOCATION/ITEM

ACTION

REMARKS

D. REMOVAL OF BROKEN BELT (Continued).

60.

Two winch line

a.Remove pins holding

pulleys (21).

pulleys in place.

b.Mount pulleys with two

Use four washers each for

bolts (23), nuts (24), and

spacers between pulleys and

twelve washers (22) to

frame.

the lower rear frame holes.

61.

Conveyor belt (20).

Let the end of the belt down

over the winch line pulleys (21).

62.

Two ropes (19) and

a.Attach to upper and lower

four wires (18).

half of chain links.

b.Attach other end of ropes

(19) to towing vehicle (27).

c.Pull both halves of conveyor

First pull one half out, then

belt (20) from mixer body.

attach ropes and wires to

other half.

63.

Two locknuts (13).

Loosen.

64.

Two belt tensioning

Loosen bolts (12) approximately

Lubricate bolts and bearing

devices (14).

1-1/2 in. (38 mm).

slides for easy operation.

CAUTION

Do not turn bolts (12) farther than 1-1/2 in. (38 mm) or the sprockets will catch in the cross angles.

65.

Conveyor belt (20).

Install. (Refer to procedure B.)

7-54