TM-5-3895-372-20

CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL

AUGUST 1980

TM-5-3895-372-20 - Page 351 of 694

TM 5-3895-372-20

AGGREGATE SUPPLY SYSTEM.

7-15. CONVEYOR BELT AND BELT LACER REPAIR (Continued).

LOCATION/ITEM

ACTION

REMARKS

REPAIR (Continued).

NOTE

Repeat steps 5d and 6 with the balance of the crossbars.

Be certain that

0.56 in. (14.3 mm) of the new rubber belt is extending beyond the

centerline of the second roller (2

7.

Rubber belt (9).

After installing nuts (8) and

bolts (11) in the last crossbar

(10), cut extra length of the

rubber belt (9) so that it is

extending 0.56 in. (14.3 mm)

beyond the centerline of the

second roller (3).

8.

Bolts (11).

Cut off the excess length with

This distorts the treads and

a bolt cutter or chisel.

Prevents the nuts (11) from

coming off.

NOTE

The center of the pin (6) should be in the center of the side bars (5).

9.

Belt lacers (7).

Use the pin (6) to space belt

Hammer teeth of belt lacer

lacers between the ends of

into rubber belt (9).

rubber belt (9).

7-59