TM-5-3895-372-20
CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL
AUGUST 1980
TM-5-3895-372-20 - Page 520 of 694
TM 5-3895-372-20
HYDRAULIC SYSTEM.
10-14.
OIL RESERVOIR MAINTENANCE (Continued).
LOCATION/ITEM
ACTION
REMARKS
NOTE
Before beginning service, raise and prop access panel.
If gasket (8) is to be replaced,
complete steps 1, 2, and 3 only.
Proceed with steps 4 thru 10 if the oil reservoir is to be
removed.
A. REMOVAL.
1.
Sixteen bolts and washers (10).
Remove.
2.
Lid (9).
Remove.
3.
Gasket (8).
Remove.
Use sharp tool if necessary.
4.
Oil tank (1).
Drain oil.
Refer to LO 5-3895372-12.
5.
Air hose (4).
Remove from bracket.
6.
Oil return line (3) and (7).
Remove.
Drain excess oil in drain pan.
7.
Oil outlet line (6).
Remove.
Drain excess oil in drain pan.
8.
Hex bolts and
Remove two bolts and
lockwashers (2).
lockwashers.
9.
Hex bolts, lockwashers,
Remove four hex bolts,
and hex nuts (5).
lockwashers and hex nuts.
10. Oil tank (1).
Remove from vehicle.
NOTE
Use liquid teflon on all threaded joints at installation.
B. REMOVAL.
11. Oil tank (1).
Weld cracks using standard
shop practices and techniques
for welding galvanized steel.
NOTE
In extreme cases with abnormally large cracks, it may be necessary to patch the
damaged area with galvanized steel stock.
10-50
Back to Top
