TM-5-3895-372-20

CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL

AUGUST 1980

TM-5-3895-372-20 - Page 522 of 694

TM 5-3895-372-20

HYDRAULIC SYSTEM.

10-14.

OIL RESERVOIR MAINTENANCE (Continued).

LOCATION/ITEM

ACTION

REMARKS

C. INSTALLATION.

NOTE

If a new oil tank is being installed, transfer the fittings from the damaged tank to the new

tank.

12. Gasket (8).

Set in place.

If removed.

13. Lid (9).

Set in place.

If removed.

14. Sixteen bolts and

Install and tighten securely.

If removed.

lockwashers (10).

15. Oil tank (1).

Install in vehicle.

16. Hex bolts, lockwashers,

Install four hex bolts, lock-

and hex nuts (5).

washers, and hex nuts.

17. Hex bolts and lock-

Install two hex bolts and

washers (2).

lockwashers (2).

18. Oil outlet line (6).

Install outlet line (6) in

oil tank.

19. Oil return lines (3)

Install in oil tank.

and (7).

20. Air hose (4).

Install on bracket.

21. Oil tank (1).

Fill tank with oil (see

LO 5-3895372-12).

D. OPERATIONAL CHECK.

22. Mixer body.

Start up (see TM 9-2320-273-

10 and TM 5-3895-372-10).

Activate auger and check for

leaks.

Shut down auger and

stop engine.

23. Oil tank (1).

Check oil level with dipstick

in hydraulic oil tank cap.

Add oil if needed.

24. Access panel.

Close and latch.

10-52