TM-5-3895-372-34
CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
SEPTEMBER 1980
TM-5-3895-372-34 - Page 33 of 120
TM 5-3895-372-34
Figure 2-7.
Removal/lnstallation of Hydraulic Oil Pump.
(17) Remove the four base plate bolts (19 and 9), six flat washers (10), four lockwashers (12) and
four
nuts
(15),
removing bracket (11).
(18) Remove the two adjusting lock screws (13), two nuts (14), four nuts (16), and two nuts (18).
Remove plate (17).
(19) Inspect all fittings and mating flanges for crossed threads or burr Replace fittings as necessary and remove burrs
with fine sandpaper before assembly.
b. Installation.
Use no lubricants during this installation.
2-20
Back to Top
