OPERATION - Continued
8
7
10
SHOWN WITHOUT BAP INSTALLED
FOR CLARITY
9
Figure 4.
Connect Remote Control Unit.
a.
Remove remote control unit (Figure 4, Item 7) and cable (Figure 4, Item 8) from stowage box (Figure 4,
Item 9).
b.
Connect cable (Figure 4, Item 8) to curb-side or road-side LHS receptacle (Figure 4, Item 10).
6.
Position vehicle with its rear 5 to 6 ft. (1.53 to 1.83 m) from where rear of bridge bay is to sit on the ground.
Refer to TM 9-2320-435-10 or TM 9-2320-425-10.
TM 5-3990-263-13&P
0008
0008-5