TM-5-3990-263-13-P

PALLET, ADAPTER, BRIDGE, M15

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

APRIL 2012

TM-5-3990-263-13-P - Page 160 of 728

OPERATION - Continued

4.

Connect two winch hydraulic pressure hoses (Figure 3, Item 4) to male connector (Figure 3, Item 5) and female

connector (Figure 3, Item 6) located on bottom of hook arm assembly.

4

6

5

SHOWN WITHOUT BAP INSTALLED

FOR CLARITY

Figure 3.

Connect Hydraulic Hoses.

WARNING

Keep hands and fingers clear of front pin lock assemblies when in the auto engaged and

disengaged position. Failure to comply may result in serious injury or death to personnel.

5.

Secure two front pin lock assemblies (Figure 4, Item 7) in the auto engage position. Pull back curb-side and

road-side pin lock assemblies (Figure 4, Item 7) until each latch lever pin (Figure 4, Item 8) rests in base of

vertical slot (Figure 4, Item 9).

TM 5-3990-263-13&P

0012

0012-4