TM-5-3990-263-13-P

PALLET, ADAPTER, BRIDGE, M15

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

APRIL 2012

TM-5-3990-263-13-P - Page 198 of 728

CONFIGURE BAP HOLD-DOWN LOCKS - Continued

Table

1.

BAP Hold-Down Locks Checklist - Continued.

Bridge

Bay Free

Launch

Controlled

Bridge

Bay Launch

Water

Bridge

Bay

Retrieval

Unload Bridge

Bay to Ground

Load Bridge

Bay From

Ground

Notes:

1.

Refer to figure below for location of BAP hold-down locks on vehicle.

SHOWN WITHOUT BAP INSTALLED

FOR CLARITY

BAP HOLD-DOWN

LOCKS

Figure 1.

BAP Hold-Down Locks Checklist.

2.

Winch frame locking levers - UP position is locked to the BAP, DOWN position is locked to the LHS

hook arm.

3.

Jaw and latch assembly are shown on page 1-11 of TM 9-2320-425-10 or TM 9-2320-435-10.

4.

Not applicable for empty BAP (no bay uploaded).

5.

ENGAGED for empty BAP.

6.

Release hydraulic pressure on transload rollers to seat BAP fully on trailer.

7.

Moved to the fully stowed position after BAP is fully loaded on vehicle.

8.

Ramp bay launch requires center roller to be in up position.

9.

Winch frame locking levers and hydraulic hoses are returned to stowed position or up after the winch

cable and hook are removed from the bay for launch.

10. LHS PMCS requires use of BAP lock checklist if BAP is loaded.

11. Ramp and bay locks are checked according to appropriate.

TM 5-3990-263-13&P

0015

0015-2