TM-5-3990-263-13-P

PALLET, ADAPTER, BRIDGE, M15

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

APRIL 2012

TM-5-3990-263-13-P - Page 200 of 728

CONFIGURE BAP HOLD-DOWN LOCKS - Continued

Table

2.

BAP Hold-Down Locks Checklist - Continued.

Load BAP

From Ground

Unload BAP

to Ground

Transport

Mode

Transload

BAP to Trailer

Transload

BAP to Vehicle

Notes:

1.

Refer to figure below for location of BAP hold-down locks on vehicle.

SHOWN WITHOUT BAP INSTALLED

FOR CLARITY

BAP HOLD-DOWN

LOCKS

Figure 2.

BAP Hold-Down Locks Checklist.

2.

Winch frame locking levers - UP position is locked to the BAP, DOWN position is locked to the LHS

hook arm.

3.

Jaw and latch assembly are shown on page 1-11 of TM 9-2320-425-10 or TM 9-2320-435-10.

4.

Not applicable for empty BAP (no bay uploaded).

5.

ENGAGED for empty BAP.

6.

Release hydraulic pressure on transload rollers to seat BAP fully on trailer.

7.

Moved to the fully stowed position after BAP is fully loaded on vehicle.

8.

Ramp bay launch requires center roller to be in up position.

9.

Winch frame locking levers and hydraulic hoses are returned to stowed position or up after the winch

cable and hook are removed from the bay for launch.

10. LHS PMCS requires use of BAP lock checklist if BAP is loaded.

11. Ramp and bay locks are checked according to appropriate.

END OF TASK

END OF WORK PACKAGE

TM 5-3990-263-13&P

0015

0015-4