TM-5-3990-263-13-P

PALLET, ADAPTER, BRIDGE, M15

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

APRIL 2012

TM-5-3990-263-13-P - Page 211 of 728

OPERATOR MAINTENANCE

MANUALLY UNLOADING BRIDGE ADAPTER PALLET (BAP) TO THE GROUND

INITIAL SETUP:

Personnel Required

(2)

References

TM 9-2320-425-10 (WP

0076)

TM 9-2320-435-10 (WP

0076)

PERFORM PROCEDURE

NOTE

The following manual mode operations using the cab control box are to be performed only

when the normal AUTO mode electric circuit is malfunctioning.

1.

Secure winch frame to the BAP and ensure two winch frame locking levers (Figure 1, Item 1) are in the up

position.

1

2

Figure 1.

Secure Winch Frame.

2.

If locking levers (Figure 1, Item 1) are not up:

a.

Remove lockpin (Figure 1, Item 2) from each locking lever (Figure 1, Item 1).

b.

Swing locking lever (Figure 1, Item 1) to the up position.

c.

Insert lockpin (Figure 1, Item 2) into locking lever (Figure 1, Item 1).

3.

If the BAP is loaded, inspect load and ensure it is secure.

4.

Connect two hydraulic hoses (Figure 2, Item 3) to the stowed location connections (Figure 2, Item 4).

TM 5-3990-263-13&P

0018

0018-1