TM-5-3990-263-13-P

PALLET, ADAPTER, BRIDGE, M15

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

APRIL 2012

TM-5-3990-263-13-P - Page 303 of 728

FIELD MAINTENANCE

WINCH DOES NOT WIND IN

INITIAL SETUP:

Tools and Special Tools

Multimeter (WP

0078, Table 2, Item 1)

Tool Kit, General Mechanic's: Automotive

(WP

0078, Table 2, Item 1)

Personnel Required

(2)

References

TM 9-2320-435-10 (WP

0076)

TM 9-2320-425-10 (WP

0076)

WP

0004

WP

0005

References (cont.)

WP

0007

WP

0055

WP

0067

Equipment Condition

BAP loaded on vehicle. (WP

0005)

Engine turned off. (TM 9-2320-435-10 or

TM 9-2320-425-10) WP

0076

Parking brakes applied. (TM 9-2320-435-10 or

TM 9-2320-425-10) WP

0076

Wheels chocked. (TM 9-2320-435-10 or

TM 9-2320-425-10) WP

0076

TROUBLESHOOTING PROCEDURE

SYMPTOM

Winch does not Wind In.

MALFUNCTION

Quick-Disconnect Couplings are not Connected Properly.

CORRECTIVE ACTION

NOTE

Hydraulic fluid flow to winch motor may be blocked at quick-disconnect fittings if

fittings are not connected properly.

Verify male portion of quick-disconnect couplings are fully seated in female portions of couplings

and are secured by locking mechanism (Figure 1).

TM 5-3990-263-13&P

0033

0033-1