TM-5-3990-263-13-P

PALLET, ADAPTER, BRIDGE, M15

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

APRIL 2012

TM-5-3990-263-13-P - Page 312 of 728

CORRECTIVE ACTION - Continued

Figure 11.

Main Frame Junction Box (Wiring Removed For Clarity).

4.

Place positive (+) probe of multimeter on position 1 of WINCH IN solenoid connector (Figure 10).

Check multimeter for continuity.

5.

Place negative (-) probe of multimeter on position 36 of main frame junction box terminal strip

(Figure 11).

6.

Place positive (+) probe of multimeter on position 2 of WINCH IN solenoid connector (Figure 10).

Check multimeter for continuity.

a.

If continuity is not present at one or both readings, replace WINCH IN solenoid wiring

harness. Refer to TM 9-2320-435-10 or TM 9-2320-425-10.

b.

If continuity is present for both readings, replace WINCH IN directional control valve.

Refer to TM 9-2320-435-10 or TM 9-2320-425-10.

MALFUNCTION

Cab Interface Wiring Harness is Faulty (Model B Only).

CORRECTIVE ACTION

1.

Remove three thumb screws and access cover on right side of vehicle under front fender to gain

access to cab interface wiring harness connector (Figure 12).

TM 5-3990-263-13&P

0033

0033-10