TM-5-3990-263-13-P

PALLET, ADAPTER, BRIDGE, M15

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

APRIL 2012

TM-5-3990-263-13-P - Page 525 of 728

FIELD MAINTENANCE

AIR LINES AND FITTINGS REPLACEMENT (NEW CONFIGURATION)

INITIAL SETUP:

Tools and Special Tools

Tool Kit, General Mechanic's: Automotive

(WP

0078, Table 2, Item 2)

Materials/Parts

Lockwasher (WP

0082, Table 1, Item 48) Qty:

22

Ferrule (WP

0082, Table 1, Item 16) Qty:

8

References

Parts Manual (WP

0073, Figure 11)

Parts Manual (WP

0073, Figure 24)

Equipment Condition

Control valve removed. (WP

0063)

Front pin lock guard plate removed. (WP

0052)

REMOVAL

NOTE

•

Note location and position of loop clamps prior to removal to ensure proper installation.

•

All but four loop clamps are removed the same way, only one clamp setup shown.

1.

Remove nut (Figure 1, Item 1), lockwasher (Figure 1, Item 2), and loop clamp (Figure 1, Item 3) from tubing

(Figure 1, Item 4) and BAP frame. Discard lockwasher.

TM 5-3990-263-13&P

0065

0065-1